Electric Multi Roller – Industrial Movers Vehicle
Project	Performance index
Product model	SA-20T	SA-25T	SA-30T	SA-35T	SA-40T	SA-50T
Rated load	12T	15T	18T	20T	30T	40T
Traction capacity	20T	25T	30T	35T	40T	50T
Charging voltage	54.6V	54.6V	54.6V	54.6V	54.6V	54.6V
Charging current	8A	8A	8A	8A	8A	8A
Working voltage	48V	48V	48V	48V	48V	48V
Working current	60A	60A	60A	60A	100A	120A
Rated power	2*750W	2*1000	2*1000	2*1500	2*1500	2*2000
Walking speed	6-10m/min	6-10m/min	6-10m/min	6-10m/min	6-10m/min	6-10m/min
Battery capacity	60AH	60AH	60AH	60AH	100AH	120AH
Battery life	4-5H	4-5H	4-5H	4-5H	4-6H	4-6H
Driving method	4WD	4WD	4WD	4WD	4WD	4WD
Control mode	Wireless	Wireless	Wireless	Wireless	Wireless	Wireless
External dimensions	740*640*165 mm	740*640*165 mm	770*650*175 mm	770*720*175 mm	900*800*200 mm	900*800*200 mm
Wireless dual channel control

 

 

Industrial Movers Vehicle Safely and remotely position loads of up to 50tons with a single operator

self-propelled, eliminating the need to manually push or pull the load. They also ensure the safety of the operator by allowing them to work at a safe distance away from the load. The single user operation allows machine movers to tackle more projects with fewer resources, therefore more quickly recouping their initial investment.

 

standard, this range of battery- powered machine skates keeps the load close to the ground, reducing the overhead clearance required to move the load through a facility, and more importantly, increasing safety.

High maneuverability, precise control

The dual-drive motors and a 360-degree tilt swivel saddle provide agility in small areas and around tight corners. The wireless remote-control includes two joysticks to advance and steer the load, and precise speed adjustment for changing conditions.

The onboard power source makes it easier to move the load when the condition of the floor isn’t perfectly smooth or level. It provides the capability to travel over inclines of up to 3% and across ground gaps of up to 0.55″ (14mm). The setup process is easy, as the wireless controller automatically pairs with the machine skates immediately on start-up.

Up to 4x faster

These battery-powered machine skates allow you to get the job completed up to 4 times faster than conventional methods. Fully loaded, they travel up to 26 feet (8m) per minute and run for up to an impressive 4 -6hours on a single charge – giving you the potential to move loads over 1200m without the need to switch the battery.

The 55-ton model makes it possible to both lift and transport from the single unit, significantly speeding up the load moving process by reducing the number of tools involved.